469

469


  • 2 contacts
  • max. 6 A switching & permanent current
  • Drive is monostable as DC
  • Ambient temperature -25 to +80 °C
  • With forcibly guided contacts to EN 50205, application type A
  • cULus and TÜV approval
Have questions or need an offer?

We will be pleased to help you.

  • Hengstler GmbH
    Uhlandstr. 49
    78554 Aldingen
  • Tel. +49 / 7424 - 89 -468
  • Support request

General

Function / ApplicationSafety relay
Product lineHENGSTLER
Relay family469
Contactsetforcibly guided
According EN 50205Application type A
Ambient temperature [°C]-25 ... +80 °C
Soldering heat resistance [°C]260 °C
Max. soldering time [s]5 s
Pins pre-soldered with Sn 100
Approval
  • TÜV
  • cULus
Standards
  • EN 50205
  • IEC 61810-1
  • UL 508
Meets the requirementsRoHS

Mechanical

Number of NO contacts1
Number of NC contacts1
Number of CO contacts0
Dimensions L x W x H [mm]37,6 x 12,5 x 30,0 mm
Housing
  • dustproof (RT II)
  • washtight (RT III)
Shock resistance NO / NC [g]10/8 g
Puls duration (half sinus)16 ms
Vibration resistance NO / NC [g]5/5 g
Frequency range [Hz]10 - 200 Hz
Operating time NC contact, contact opens [ms] 12 ms
Operating time NO contact, contact closes [ms] 17 ms
Releasing time NO contact, contact opens [ms] 5 ms
Releasing time NC contact, contact closes [ms] 7 ms
Mechanical service life (without load)10,000,000 switching cycles
Connection typeSolder pins for pcb
Weight [g]30 g

Electrical

Drive system DC monostable
Nominal coil voltage [V]5 ... 110 V
Coil resistance [Ohm]50 ... 18,855 Ohm
Contact material
  • AgNi + 0,2 ... 2 µm Au
  • AgSnO + 0,2 ... 2 µm Au
Max. switching current [A]8 A
Max. switching voltage [V]230/240 V
Max. switching capacity [VA]1500 VA
Switching capacity AC-15 at 230 V [Ie in A]2 ... 4 A
Switching capacity DC-13 at 24 V [Ie in A]1,5 ... 2 A
Electrical service life (with nominal load)100,000 cycles
Short-circuit capacity 1000 A / AC 230 V [A]6 A
InsulationBasic insulation
With its H-469 safety relays, HENGSTLER provides a solution for all those applications that require low coil power. Only 210 mW is required to drive the two contacts. H-469 safety relays conform to EN 50205 standard, Application type A, and IEC EN 61810-1.