Product Family | 635 DIN |
Function | Totalizing counter |
Technology | Electromechanical |
Digits | |
Display | |
Preset | none |
Digit Height [mm] | 4 mm (0.2 in), visual |
Voltage | |
Reset | without reset |
Duty Cycle at 25 °C | 100 % |
Power Consumption | - at 5 VDC: 80 mW
- at 12 VDC: 200 mW
- at 24 VDC: 400 mW
- at 24 VAC: 85 mW
- at 115 VAC / VDC: 350 mW
- at 230 VAC / VDC: 665 mW
|
Cable Cross-Section | max. 2.5 mm2 (0.0039 in2) |
Pulse Length min. | 50 ms |
Residual Ripple [%] | DC mode: 48 % |
Supply Voltage | - 5, 12 and 24 VDC
- 24 VAC
- 115/230 VDC / VAC
|
Count Frequency [Hz] | 10 Hz |
Count Input | adding |
Pulse Duty Factor Count Impulse | 1:1 |
Electrical Connection | Screw terminals max. 2.5 mm² (0.0039 in2) |
Maintenance-Free operation | 10? pulses |
IP Protection Class | IP 10 |
Operating Temperature [°C] | - 10 ...
+ 50 °C (+ 14 ... 122 °F) |
Storage Temperature [°C] | - 40 ...
+ 85 °C (+ 14 ... 122 °F) |
Degree of Protection | IP 10 |
General Design | EN 61 010-1 / IEC 61010-1 |
Vibration Resistance | 50 m/s² (164 ft/s²) (10 . |
Shock Resistance | 2000 m/s² (6561 ft/s²) (6 ms) acc. IEC 068-2-27 |
Protection Class | II, EN 61010-1 / IEC 61010-1 |
Contamination Level | |
Size [mm] | 69x26x28 |
Mounting Options | DIN-rail attachment |
Mounting | DIN-rail attachment |
Reset | without reset |
Weight [g] | approx. 40 g (3.2 oz) |
Mounting Position | horizontal rolling axis |
Type 635 DIN electromechanical totalizing counter has a 6-digit optical display and is equipped with DIN rail fitting. The device can operate across a broad range of voltage, which enables it to run on 5, 12 and 24 volts DC and 115 or 230 volts AC. The counter is connected up using screw terminals.