| Product Family | 635 DIN |
| Function | Totalizing counter |
| Technology | Electromechanical |
| Digits | |
| Display | |
| Preset | none |
| Digit Height [mm] | 4 mm (0.2 in), visual |
| Voltage | |
| Reset | without reset |
| Duty Cycle at 25 °C | 100 % |
| Power Consumption | - at 5 VDC: 80 mW
- at 12 VDC: 200 mW
- at 24 VDC: 400 mW
- at 24 VAC: 85 mW
- at 115 VAC / VDC: 350 mW
- at 230 VAC / VDC: 665 mW
|
| Cable Cross-Section | max. 2.5 mm2 (0.0039 in2) |
| Pulse Length min. | 50 ms |
| Residual Ripple [%] | DC mode: 48 % |
| Supply Voltage | - 5, 12 and 24 VDC
- 24 VAC
- 115/230 VDC / VAC
|
| Count Frequency [Hz] | 10 Hz |
| Count Input | adding |
| Pulse Duty Factor Count Impulse | 1:1 |
| Electrical Connection | Screw terminals max. 2.5 mm² (0.0039 in2) |
| Maintenance-Free operation | 10? pulses |
| IP Protection Class | IP 10 |
| Operating Temperature [°C] | - 10 ...
+ 50 °C (+ 14 ... 122 °F) |
| Storage Temperature [°C] | - 40 ...
+ 85 °C (+ 14 ... 122 °F) |
| Degree of Protection | IP 10 |
| General Design | EN 61 010-1 / IEC 61010-1 |
| Vibration Resistance | 50 m/s² (164 ft/s²) (10 . |
| Shock Resistance | 2000 m/s² (6561 ft/s²) (6 ms) acc. IEC 068-2-27 |
| Protection Class | II, EN 61010-1 / IEC 61010-1 |
| Contamination Level | |
| Size [mm] | 69x26x28 |
| Mounting Options | DIN-rail attachment |
| Mounting | DIN-rail attachment |
| Reset | without reset |
| Weight [g] | approx. 40 g (3.2 oz) |
| Mounting Position | horizontal rolling axis |
Type 635 DIN electromechanical totalizing counter has a 6-digit optical display and is equipped with DIN rail fitting. The device can operate across a broad range of voltage, which enables it to run on 5, 12 and 24 volts DC and 115 or 230 volts AC. The counter is connected up using screw terminals.
