635 DIN

635 DIN


  • DIN rail fitting
  • Wide range of voltages
  • Screw terminals
  • No reset
Have questions or need an offer?

We will be pleased to help you.

  • Hengstler GmbH
    Uhlandstr. 49
    78554 Aldingen
  • Tel. +49 / 7424 - 89 -0
  • Support request

General

Product Family635 DIN
FunctionTotalizing counter
TechnologyElectromechanical
Digits
  • 6-digit
  • 7-digit
Display
  • 6-digit
  • 7-digit
Presetnone
Digit Height [mm]4 mm (0.2 in), visual

Electrical

Voltage
  • 5 VDC
  • 24-230 VAC/DC
Resetwithout reset
Duty Cycle at 25 °C100 %
Power Consumption
  • at 5 VDC: 80 mW
  • at 12 VDC: 200 mW
  • at 24 VDC: 400 mW
  • at 24 VAC: 85 mW
  • at 115 VAC / VDC: 350 mW
  • at 230 VAC / VDC: 665 mW
Cable Cross-Sectionmax. 2.5 mm2 (0.0039 in2)
Pulse Length min.50 ms
Residual Ripple [%]DC mode: 48 %
Supply Voltage
  • 5, 12 and 24 VDC
  • 24 VAC
  • 115/230 VDC / VAC
Count Frequency [Hz]10 Hz
Count Inputadding
Pulse Duty Factor Count Impulse1:1
Electrical ConnectionScrew terminals max. 2.5 mm² (0.0039 in2)

Counter

Maintenance-Free operation10? pulses

Environment and security

IP Protection ClassIP 10
Operating Temperature [°C]–- 10 ...… + 50 °C (+ 14 ... 122 °F)
Storage Temperature [°C]–- 40 ...… + 85 °C (+ 14 ... 122 °F)
Degree of ProtectionIP 10
General DesignEN 61 010-1 / IEC 61010-1
Vibration Resistance50 m/s² (164 ft/s²) (10 .
Shock Resistance2000 m/s² (6561 ft/s²) (6 ms) acc. IEC 068-2-27
Protection ClassII, EN 61010-1 / IEC 61010-1
Contamination Level
  • V 2
  • EN 50178

Mechanical

Size [mm]69x26x28
Mounting OptionsDIN-rail attachment
MountingDIN-rail attachment
Resetwithout reset
Weight [g]approx. 40 g (3.2 oz)
Mounting Positionhorizontal rolling axis
Type 635 DIN electromechanical totalizing counter has a 6-digit optical display and is equipped with DIN rail fitting. The device can operate across a broad range of voltage, which enables it to run on 5, 12 and 24 volts DC and 115 or 230 volts AC. The counter is connected up using screw terminals.