tico 732 Multifunctional counter

Tico 732


tico 732 Multifunctional counter

  • Very easy operation
  • LED or LCD display
  • Up to two presets
  • Prescaler 0.001 - 999.999
Have questions or need an offer?

We will be pleased to help you.

  • Hengstler GmbH
    Uhlandstr. 49
    78554 Aldingen
  • Tel. +49 / 7424 - 89 -301
  • Support request

General

Product Familytico 732
FunctionMultifunctional counter
TechnologyElectronic
Digits6-digit
Display
  • 6-digit
  • count reading / preset
  • leading zero suppression
  • decimal point
Preset
  • 1 preset
  • 2 presets
  • without presets
Digit Height [mm]
  • LCD 9 mm (0.4 in)
  • LED 7.6 mm (0.3 in)
Display Variant
  • LCD
  • LED

Electrical

Voltage
  • 12-24 VDC
  • 24-230 VAC
Reset
  • manual reset
  • electrical reset
Signal Times0.02 s to 1 s or bistable
Current Consumption [mA]
  • 12-24 VDC, LCD: <100 mA
  • 12-24 VDC, LED: 150 mA
  • 24 VAC: <250 mA
  • 100 VAC: < 60 mA
  • 115 VAC: <50 mA
  • 230 VAC: <25 mA each, incl. power to sensor
Input Resistanceapprox. 10 k? (static)
Pulse Length min.
  • 17 ms (30 Hz)
  • 100 ?s (5 kHz)
Supply Voltage
  • 12-24 VDC
  • 24, 100, 115, 230 VAC
Count Frequency [Hz]max. 5 kHz (2,5 kHz using 2 channels)
Sensor Supply
  • 12 - 30 VDC
  • max. 50 mA
Storage of ValuesNVM > 10 years
Electrical Connectionscrew terminals
Amplitude Threshold
  • < 2 V and > 8 V or < 2 V and
  • > 3.8 V at TTL levels
  • max. 40 VDC
Active Edgeprogrammable, positive with PNP input, negative with NPN input
Pulse Shapeany square wave (1:1 for max. frequency)
Prescalerfrom 0.001 to 999.999 programmable
Relay (Preset 1 and 2)
  • Varistor max. 250 VAC / 30 VDC
  • min. 5 V AC/DC
  • max. 5A
  • min. 10 mA
  • delay < 10 ms
Transistor output (Preset 1 + 2)
  • DC supply: PNP
  • active high
  • VDC-2V (supply voltage-2 V)
  • max. 30 mA
  • transformer version:PNP
  • active high
  • 12-30 VDC
  • max. 30 mA

Tachometer

Measuring Principle (tachometer)period measurement (1/tau)
Display Range1/min or 1/sec
min. Frequency0.125 Hz = 8 sec
Limit Values2 alarms with programmable start suppression

Time counter

Time Base (Tachometer)
  • programmable, sec
  • min
  • h or hh.mm.ss
Measuring Principle (timer)pulse width or period duration measurement (start-stop)
Function Time Countersingle pulse measurement (short meter) or cumulative measurement (hour meter)
Resolutionprogrammable 1, 0.1, 0.01, 0.001

Environment and security

IP Protection ClassIP 65
Operating Temperature [°C]0 ... + 50 °C (+ 32 ... 122 °F)
Storage Temperature [°C]– 20 … + 70 °C (+ 14 ... 122 °F)
Degree of Protection
  • front IP 65
  • connections IP 20
Cable Length< 30 m
General DesignEN 61 010-1 / IEC 61010-1
ApprovalsUL + CUL E 96 337
Vibration Resistance10 m/s² (33 ft/s²) (10 ... 150 Hz) acc. IEC 68-T2-6
Shock Resistance100 m/s² (328 ft/s²) (18 ms) acc. IEC 68-T2-27
Protection ClassII, EN 61010-1 / IEC 61010-1
Contamination Level
  • V 2
  • EN 50178

Mechanical

Size [mm]48x48x108
Mounting OptionsClamping frame
Mountingwith clamping frame
Reset
  • manual reset using keypad
  • external reset
  • static or dynamically programmable
  • pulse duration > 5 ms
  • automatic reset after main preset has been reached (programmable)

Zusatz

TypeMultifunctional counter
The Tico 732 stands out as a result of its versatility and its multifunctional ability as a counter with up to two presets, as a tachometer, timer, shift or batch counter. The voltage supply is either 12 to 24 volts DC, 24 volts AC, 115 volts AC or 230 volts AC. The 6-digit display is noticeably easy to read and is available as either an LCD or an LED display. The device offers many programming options, has an integrated totalizing counter and is equipped with a keypad locking function. Pulse evaluation can be freely selected.